Y Type Jacketed Flush Bottom Valve

Y Type Jacketed Flush Bottom Valve, Flush Bottom Jacketed Valve, Steam Jacketed Tank Bottom Discharge Valve, Vessel Bottom Jacketed Valve, Vessel Discharge Jacketed Valve, Jacketed Valve, Steam Jacketed Valve, Hot Oil Jacketed Valve, Flush Bottom Valve, Y Type Flush Bottom Valve, Angle Type Flush bottom Jacketed Valve, Pneumatic Cylinder Actuator, Electrical Actuator, Motorized Actuated Jacketed Valves Manufacturers and Exporters by Nivz Valves.

Installation of Flush Bottom Jacketed Valve at Tank or Vessel bottom discharge for service application of Liquid Bitumen, Coal Tar, Plasticizers, Dry Sulphur, Molten Sulphur, Naphthalene, Polymer, Oligomer, Resin, Lactum, Process Chemical, Asphalt and more.

Description of Y Type Flush Bottom Jacketed Valve:

• Body & Bonnet Material – ASTM A 312 Type 304 (S.S. 304 Pipe Fabricated Body)
• Internal Working Parts – ASTM A 276 T-304 (S.S. 304)
• Jacket Material – Cast Carbon Steel (ASTM A 106 GR. B, Sch. 40, C.S. Seamless Pipe)
• Seat- SS 304 with Stellite Hard Face F6
• Gland Packing Material – Pure Graphite Ring, Molded Type
• Gasket – S.S. 316 Spiral Wound with Graphite Filled
• Valve Operation – Ductile Iron Material Hand Wheel Operated
• End Connection – Flanged End Raised Face, ANSI B 16.5, Class 150 standard drilled
• Pressure Rating of Y Type Jacketed Flush Bottom Valve – Class 150
• Jacket Connection – Flanged End RF, ANSI B 16.5, Class 150 standard drilled, Size 1″ (25NB)
• No. of Jacket Connection – One Inlet + One Outlet + One Drain = Total Three Port
• Size Valve = DN125 x DN80 (5″ X 3″ / 125NB X80NB)
• Application
  Process Flow Media (going to pass through valve body) – Oligomer (Polymer) at 260 to 350 Deg. C. Temperature and Pressure at 8 Bar
  Jacket Passing Media (going to pass through valve jacket cavity) – Hot Oil at 280 to 350 Deg. C. Temperature and Pressure at 10 Bar
• Body Hydraulic Test carried out at – 31 KG./CM2 (30 BAR)
• Seat (Closure) Hydraulic Test carried out at – 22 KG./CM2 (21 BAR)
• Back Seat Hydraulic Test carried out at – 22 KG./CM2 (21 BAR)
• Jacket Hydraulic Test carried out at – 15 KG./CM2 (14 BAR)

Nivz an exporters of Y Type Jacketed Flush Bottom Valve, Half Jacketed, Full Jacketed Flush Bottom Valve, Angle Shape, Y Shape, Bottom Discharge, Vessel Discharge, Reactor Bottom Angle Jacketed Valve, Tank Bottom Discharge Line, Partial Jacketed Y Type Flush Bottom Valve, Therminol, Hot Oil, Steam Jacketed Y Type Flush Bottom Valve. Manufacturer – Supplier – Exporter – Importer – Stockist of Y Type Jacketed Flush Bottom Valve.

Basic Two type of Jacketed Y Type Valve :
1) Inside Vessel Opening Y Type Jacketed Flush Bottom Valve = At the time of valve opening, plug open (up) inside vessel towards agitator.
2) Inside Valve Body Opening Y Type Jacketed Flush Bottom Valve = At the time of valve opening, plug open (down) inside body of valve.

Dispatch Date of Y Type Jacketed Flush Bottom Valve: Date 09/01/2018