Jacketed Globe Valve – Suitable for high temperature, pressure, abrasive slurry application.
Jacketed Globe Valve Manufacturer, Hot Oil, Steam Jacketed Globe Valve, Thermic Fluid, Thermal Oil, Therminol, Jacketed Globe Valve Suppliers, Stockist, Exporters, Importer, Suppliers, Stockist. Bolted Bonnet, Rising Stem, Hand Wheel Operated, Flanged End Jacketed Globe Valves. Pressure Rating in Class 150,300 & 600.
Full and Half Jacketed Globe Valve mostly used for Open / Close or Regulating the media flow and main advantage is one of the easiest valves to repair.
Nivz Jacketed Globe Valves are Bolted Bonnet construction and OS & Y Type design with T type body pattern. Bolted bonnet Jacketed Globe Valves are very easy to maintenance. 3 Way Jacketed Globe Valve also an option for Mixing & Diverting application and available with various operation like by manual hand wheel, pneumatic or motorized electrical actuator operated.
Jacketed Globe Valve design is Outside Screw & Yoke (OS & Y) type, which keeps the stem threads outside the valve and is suggested where high temperature, corrosive and abrasive solid particle in the line might damage the stem threads inside the valve.
To get better performance against high temperature all gland packing we use die molded pure graphite / grafoil rings and inconel wire based graphite asbestos cut braided rings.
All standard range of Jacketed Globe Valve manufacture with stainless steel 304/316/316l spiral wound gasket with graphite filled or graphite tensed gasket depends on flow media pressure and temperature.
Nivz Valves a leading exporter and manufacturer of various application suitable Full or Partial Half Jacketed Globe Valve with fully steam or hot oil jacketed.
Model Series JKGL15/30 each Jacketed Globe Valves design as per BS 1873/ASME B 16.34 Standard.
Jacketed Gate Valve largely use to sustain process media temperature during process to keep fluids at a lower viscosity to operate valve smoothly.
Each Full Jacketed Globe Valve body construction replace by adding minimum one size higher flanges to achieve proper tighten space of bolt and nut.
As example: for Full Jacketed Globe Valve Size DN50 x DN80 (2” x 3”), Jacketed Ball Valve has the nominal bore of DN50 (2” – 50MM) and the flange size DN80 (3” – 80MM), which allows enough space for bolting clearance after jacket fabricated (welded) on modified valve body. These types of jacketed globe valve termed as a Full Jacketed Gate Valve.
We are manufacturer of Full Jacketed Globe Valve in size from DN50 x DN 80 (2″ X 3″) to DN150 x DN250 (6″ x10″) and for Partial Half Jacketed Gate Valve DN50 (2″) to DN600 (24″)
Steam and Hot Oil Jacketed Globe Valves mostly use in application of Polymer, Bitumen, Liquid Asphalt, Coal tar, Lactum, Highly Viscous Media, Molten Sulfur or Sulphur. All Jacketed Gate Valves have standard Inlet & Outlet connection for Steam or Hot Oil circulation. Jacket connection can be Threaded (BSP / NPT Female) or Flanged End.
Nivz manufacturing Jacketed Globe Valve with different type of Disc as Regulating Disc, Flat Disc, Plug Type Disc, Guided Disc, Stellite-F6 etc to suit various application.
Jacketed Globe Valve available with body material CS-WCB, LTCS-LCC/LCB, SS304/316/304L/316L-CF8/CF8M/CF3/CF3M, Alloy20-CN7M, NACE MR-0175, Duplex Steel, Super Duplex Steel & Hastelloy C22/C276 Grade.
Different combination of jacketed globe valve body – bonnet material and jacket material to meet project process requirement. Various options are as per below:
Carbon Steel Body & Bonnet – Carbon Steel Jacket
Stainless Steel Body & Bonnet – Carbon Steel Jacket
Stainless Steel Body & Bonnet – Stainless Steel Jacket
Duplex Steel Body & Bonnet – Carbon Steel Jacket
Duplex Steel Body & Bonnet – Stainless Steel Jacket
Alloy 20 Body & Bonnet – Carbon Steel Jacket
Alloy 20 Body & Bonnet – Stainless Steel Jacket
Hastelloy C22 / C276 Body & Bonnet – Carbon Steel Jacket
Hastelloy C22 / C276 Body & Bonnet – Stainless Steel Jacket
More customized requirement also fulfill by us.
Nivz all full jacketed globe valve face to face distance we provide as per BS 1873/ANSI/ASME B 16.10 standard of oversize flange size which facilitate to replace in future with any standard non jacketed gate valve also.
Steam or Hot Oil Jacketed Globe manufacturing range covers various manifold such as Manual Hand Wheel operated / Gear operated / Pneumatic Spring & Diaphragm Type Actuator operated / Pneumatic Spring Return and Double Acting Cylinder Actuator Operated / Motorized Electrical Actuator operated.
Our supplied Jacketed Valve satisfactory performing at present in a country Kingdom of Saudi Arabia, Brazil, Israel, United Arab Emirates – Dubai, Turkey, Australia, Africa, Egypt, United States of America, Oman, Malaysia, Jordan, USA – America, Malaysia, Philippines, Vietnam, Singapore, India, etc.