 |
Wide
Range of Industrial Jacketed Valve Manufactuers & Exporters
What
is Jacketed Ball Valve?
Jacketed ball valve is being used to handle
highly viscous materials or materials that solidify at ambient or
normal temperatures, are manufacturing from PUB Process Valves &
Automation for use with steam, hot water, hot thermic fluid oil or
other heat transfer media. These valves ensure free flow through the
valve and prevent clogging when the valve is in close position.
Jacketed Ball Valve can various types of design to suit application
such as Full Jacketed Ball Valve, Half Jacketed Ball Valve, Partial
Jacketed Ball Valve, Tailor Made Jacketed Ball Valve, Full Bore
Jacketed Ball Valve, Reduce Bore Jacketed Ball Valve etc. Jacket
have minimum 02 Nos. of Nipple or Flange Connection for hot media in
out. One nos connection more can provide at bottom for drain
purpose.
Series: FJK80/FJK81 – Jacketed Ball Valve (Full Jacketed)
| The Jackets assure consistent valve Heating or Cooling of the process media to prevent crystallization or seizing of flow media. The Jacketed Ball Valve (Heating Jacket Ball Valve) with very well design to help the high temperature steam or oil flow over the valve ball & body parts to keep the media liquid. This applies especially to media like bitumen, asphalt, chocolate, liquid sulfur, Lactum & Soap application. In addition, the efficient flow of media is ensured through the elimination of pockets.
PUB Process Valves & Automation offers a complete range of Jacketed Ball Valves. The Jacket covers the body from one flange to the other flange. Jacketed Ball Valve body is modified by adding oversize flanges. As example:
4" x 4" Jacketed Ball Valve has the nominal bore of 4" (DN 75) and the flange size is 4"(DN 10). It allows enough space for bolting clearance after jacket fabricated on valve body. Jacketed ball valves being used to handle highly viscous materials or materials that solidifies at ambient temperatures.
|
|
|
|
Steam, Thermic Fluid Oil (High Temperature Oil) or Hot Water can be used as carrier for heating media. Following quality assurance rules, every valve is tested again after the Jackets have been welded (Fabricated) to the body. Jacket Hydraulic & Air Test is carried out at 6.0 Kg. /Cm2.
Generally standard Jacketed Ball Valves are delivered in cast carbon steel (ASTM A 216 GR. WCB) and different types of stainless steel (ASTM A
451 GR. CF 8/8M/4/4M) materials. Other special materials are available upon special request.
PUB Process Valves & Automation Jacketed P.T.F.E. seated Ball Valves gives Zero Leakage, Tight Shut-Off and Low Torque with easy smooth operation at temperature ranging from
-200 C. to +2200 C. Electro-Polished, Buff Finish & Ultra clean valve also provided for Food & Pharmaceutical Industries on special request.
VALVE OPERATION: PUB Process Valves & Automation Ball Valves are generally supplied with manual lever or gear actuator operated; it depends on size of valve. PUB Process Valves & Automation also offering Ball Valves with either Pneumatic or Electrical actuator operated for automation, which is specialty of ours.
WIDE RANGE OF BODY SEAT, SEAL & PACKING: PUB Process Valves & Automation Ball Valves are also available with different type of Seats, Seals & Packing material such as P.T.F.E. (Virgin) / Glass Filled P.T.F.E. / Carbon Filled P.T.F.E. to suit various industrial applications.
|
Jacketed
Ball Valve Dimensions
Jacketed
Ball Valve Dimensions: Manufacturing Standard BS EN ISO 17292 (BS
5351)
Flange
Drilling & Dimensions - As Per ANSI B 16.5, Class 150
(Other Standrad Drilling Available on Request)
| Size
(Inch) |
1/2"
x 1" |
1"
x 1-1/2" |
1"
x 2" |
1-1/2" x
2-1/2" |
2"
x 4" |
2-1/2"
x 4" |
4"
x 4" |
4"
x 6" |
6"
x 10" |
| Size
(DN) |
15
x 25 |
25
x 40 |
25
x 50 |
40
x 65 |
50
x 80 |
65
x 100 |
80
x 100 |
100
x 150 |
150
x 200 |
| L |
107.9 |
165 |
178 |
190.5 |
204 |
229 |
229 |
267 |
292.1 |
| ØG |
12.5 |
25 |
25 |
48 |
50 |
64 |
75 |
100 |
150 |
| ØD |
108.0 |
127.0 |
152.4 |
177.8 |
190.5 |
228.6 |
228.6 |
279.0 |
406.4 |
| ØE |
79.2 |
98.5 |
120.6 |
149.7 |
152.4 |
190.5 |
190.5 |
241.4 |
461.9 |
| ØF |
50.8 |
74.0 |
92.1 |
104.7 |
127.0 |
157.2 |
157.2 |
215.9 |
424.8 |
| N |
4 |
4 |
4 |
4 |
4 |
8 |
8 |
8 |
12 |
| ØO |
15.8 |
15.8 |
19 |
19 |
19 |
19 |
19 |
22.2 |
25.4 |
| T |
11.1 |
14.4 |
15.8 |
17.7 |
19 |
24.8 |
24.8 |
25.4 |
40.2 |
|
***
Contact Factory for More Size, More Pressure Rating
Jacketed Ball Valve Dimensions. We can also do manufacturing
as per your Dimension Jacketed Ball Valve |
Jacketed Ball
Valve Salient Features
|
- High Performance Ball Valve
- Longer Smooth Life
- Positive Tight Shut off
- Quick in Action
- No Lubrication
- Compact Design
|
- Low Pressure Drop
- Simplicity
- Heating / Cooling Jackets
- Easy for Automation
- Wide selection of Different Jacket Material
|
|
Jacketed Ball
Valve Application
|
- Handling Highly Viscous Materials
- Bitumen / Asphalt Plant
- Lactum Media Pipe Line
- Coaltar Process Line
- Sulhpur Process Pipe Line
- Soap Manufacturing Line
|
|
|
Design & Testing International Standard of
Series: FJ80/FJK81 – Jacketed Ball Valve
|
|
| Valve Design |
: |
BS EN ISO 17292 (BS 5451) / ANSI B 16.44 |
| Pressure Testing |
: |
BS 6755 Part II / API 598 / API 6D |
| Leakage Class |
: |
Class VI (Zero Leakage) |
| Face to Face |
: |
As Per ANSI B 16.10 |
| Flange Drilling |
: |
ANSI B 16.5 / BS 10 Table / DIN / IS / JIS Std. |
| Size Range |
: |
1” x 2” To 8” x 12” |
|
|
Material of Construction for Series: FJ800 – Jacketed Ball Valve
|
|
|
|
|
|
|
Body / Nut
- Cast Carbon Steel to ASTM A 216 GR. WCB
- Stainless Steel to ASTM A 451 GR. CF 8 / 8M / 4 / 4M
Ball (Solid/Hollow)
- Stainless Steel to ASTM A 451 GR. CF 8 / 8M / 4 / 3M
- Hast Alloy B / C
- ASTM A 351 GR. CN 7M (Alloy 20)
Stem/Pin
- AISI 410 (S.S. 410 – 13% Cr. Steel)
- AISI 304 (S.S. 304)
- AISI 316 (S.S. 316)
- AISI 304L (S.S. 304L)
- AISI 316L (S.S. 316L)
- Hast Alloy B / C
- Alloy 20
|
Ball Seat / Gland Seal / Stem Seal
- P.T.F.E. – Virgin
- P.T.F.E. – Glass Filled
- P.T.F.E. – Carbon Filled
Jacket Material (Fabricated/Welded)
- M.S. (C.S.)
- S.S. 304
- S.S. 316
- S.S. 304L
- S.S. 316L
|
|
Please specify below details at the time of enquiries/orders:
|
- Valve Size / Pipe Line Size
- Pressure Rating Class
- Drilling Standard
- Material of Construction (Body Material)
- Trims (Internal) Parts Material
- Jacket Material
- Type of Jacket Connection (Flanged/Screwed)
|
- Jacket Connection Size
- Flow Medium (Service/Application)
- Design Pressure & Operating Pressure
- Design Temperature & Operating Temperature
- Jacket Passing Flow Media
- Jacket Passing Media Working Pressure & Temperature
- Type of Operation Manual / Pneumatic Operated
|
|
Wide Range of Industrial Ball Valve Mfg. by “PUB”
|
- Cast Iron Ball Valve Manufacturer
- Cast Carbon Steel Ball Valve Manufacturer
- Stainless Steel Ball Valve Manufacturer
- Forged Steel Ball Valve Manufacturer
- Single Piece Design Ball Valve Manufacturer
- Two Piece Design Ball Valve Manufacturer
- Three Piece Design Ball Valve Manufacturer
- Multiport Ball Valve Manufacturer
- Mixing & Diverting Type Ball Valve Manufacturer
- High Pressure Ball Valve Manufacturer
- Two Way Ball Valve Manufacturer
- Three Way Ball Valve Manufacturer
- Four Way Ball Valve Manufacturer
- Fire Safe Ball Valve Manufacturer
- High Performance Ball Valve Manufacturer
|
- Jacketed Ball Valve Manufacturer
- Half Jacketed Ball Valve Manufacturer
- Full Jacketed Ball Valve Manufacturer
- Sulphur Jacketed Ball Valve Manufacturer
- Flush Bottom Ball Valve Manufacturer
- Gear operated Ball Valve Manufacturer
- Pneumatic Operated Ball Valve Manufacturer
- Electrical Operated Ball Valve Manufacturer
- I.C. Ball Valve (Investment Casting) Manufacturer
- Zero Leakage Ball Valve Manufacturer
- High Performance Ball Valve Manufacturer
- Extended Bonnet Ball Valve Manufacturer
- Wafer Type Ball Valve Manufacturer
- High Pressure Ball Valve Manufacturer
|
|
|
Recent
Executed Jacketed Ball Valve Some Purchase Order
| Date:
15/04/2013 - Steam Jacketed Ball Valve supply
to overseal client. Jacketed Ball Valve
Specification - Body & Ball - ASTM A 351 GR. CF 8M (S.S.
316), Stem - S.S. 316, Seat/Seal/Packing - 25% Glass
Filled Teflon (GFT), Operation - Manual Hand Lever
Operated. We have export this valves to KINGDOM
OF SAUDI ARABIA. We supply total 40 Nos of
Steam Sulfur Jacketed Ball Valve, Size range cover
3/4" x 1-1/2" (DN20 x DN40) to 6" x
8" (DN150 x DN200). All Valve pressure rating -
300# & Flange Drilling - As Per ANSI B 16.5, Class
300. |
|
|
|
Date:
14/12/2012 - Jacketed Ball Valve supply to
TYCO Flow Controls, Australia. Valve Body + Ball +Stem +
Jacket Material - Stainless Steel 316, Seat, Seal &
Gland Packing - PTFE, Size of Valve - 3" x 4"
(DN80 x DN 100). We dispatch this valves to AUSTRALIA. |
 |
|
Date:
05/12/2012 - Steam Sulfur Jacketed Ball Valve supply for
Sulphur application in Chemical Plant.
Jacketed Ball Valve
Specification - Body - ASTM A 216 GR. WCB (Cast Steel), Ball
& Stem - S.S. 316, Seat/Seal/Packing - 25% Glass
Filled Teflon (GFT), Operation - Manual Hand Lever
Operated. We have export this valves to EGYPT. |
 |
| Date:
02/08/2012 - Jacketed Ball Valve supply for
Sulphur application.
Jacketed Ball Valve
Specification - Body - ASTM A 216 GR. WCB (Cast Steel), Ball
& Stem - S.S. 304, Seat/Seal/Packing - 25% Glass
Filled Teflon (GFT), Operation - Manual Hand Lever
Operated. We have export this valves to BAHRAIN. |
|
|
|
| Date:
10/07/2012 - Jacketed Ball Valve supply for
Chemical Indstires in Viscous Organics application.
Jacketed Ball Valve
Specification - Body - ASTM A 351 GR. CF 8M (S.S. 316), Ball
& Stem - S.S. 316, Seat/Seal/Packing - 25% Glass
Filled Teflon (GFT), Operation - Manual Hand Lever
Operated. Valves are going to installed in 100% Export
Oriented Unit Chemical Plant of Andhra Pradesh State,
INDIA. |
|
|
|
| Date:
21/03/2012 - Steam Jacketed Ball Valve supply for
Chemical Indstires in Sulphur application. Steam
Jacketed Ball Valve
Specification - Body - ASTM A 216 GR. WCB, Ball & Stem -
S.S. 316, Seat/Seal/Packing - 25% Glass Filled Teflon
(GFT), Operation - Manual Hand Lever Operated. Valves are going to installed in
100% Export Oriented Unit Chemical Plant of Haryana
State, INDIA. |
|
|
|
|
|
